基于"一带一路"建设的环渤海地区港口优势评价          下载免费PDF全文

赵江南  周跃 《海洋开发与管理》2019,36(7):83-88

港口作为海陆运输的节点,是一个城市和国家的重要门户,对推动经济发展和对外贸易有着不可忽视的作用。基于国家提出的"一带一路"建设,评估环渤海港口的发展优势,逐步实现从沿海、沿江开放向内陆延伸具有重要意义。文章选取环渤海港口中的大连、天津、唐山、丹东、营口、锦州、秦皇岛、黄骅、日照、青岛、威海和烟台共12个港口进行发展优势对比。从港口吞吐量、港口规模范围、港口城市及腹地、港口未来发展4个方面构建环渤海港口优势评价体系。并利用熵权-TOPSIS法进行深入的实证分析。结果表明,环渤海港口群港口发展优势水平悬殊,基本可以分为4个档次。基于此,环渤海各港口应合理准确定位,通过错位发展和协同合作等方式谋求共赢。  相似文献   

环渤海区域及邻区现今地壳构造运动形变特征分析     

赵旭坤  张俊  雷前坤  范成成 《大地测量与地球动力学》2019,39(11):1101-1105

将环渤海区域划分为5个次级块体，利用整体旋转与线性应变模型分析2009~2014年中国大陆构造环境监测网络的GPS对地观测速度场数据，得到相对于欧亚板块0.5°×0.5°的水平运动速度场和应变场。分析形变速度场和应变场的空间变化发现，环渤海区域整体上呈现0.25×10^-9/a的NW-SE 111.3°的双向趋势性扩张运动，太行块体、山西块体分别呈NW-SE 116.3°、NW-SE 130°的微弱扩张运动，胶辽块体、冀鲁块体和阴山-燕山块体分别存在NW-SE 144.3°、NE-SW 39.5°和NW-SE 155.6°的微弱压缩运动，其中太行块体的扩张运动量级相对于其他次级块体较大。尽管环渤海区域内部各次级块体的形变在空间上存在以上差异，但整体上环渤海区域主压应变轴方向基本为NEE-SWW，主张应变轴方向为NNW-SSE，且主压应变轴走向为NE 47.70°～89.74°，与利用地球物理方法得到的主压应变轴优势方向大体一致，表明环渤海区域现今地壳运动相对稳定。  相似文献   

南天山西段地震尾波Q值研究     

尼鲁帕尔&#;买买吐孙  夏爱国  海仁妮莎 《中国地震》2017,33(3):432-441

基于新疆地震台网的数字地震波形资料,采用Aki的地震尾波单次散射模型,选取了南天山西段10个台站周围60km范围内M_S≥2.0的397次地震事件计算并得到了不同台站的尾波Qc值。结果显示,南天山西段尾波Q_0值平均值在140~390之间,其中喀什台和乌恰台Q_0值最低;频率相关系数η的平均值在0.62~1.00之间,拟合平均Q值与对应频率之间的关系结果为Q=261.2±110.8f~(0.80±0.28),表明该地区是以低Q_0高η值为特征的构造活跃区。  相似文献   

邢台地区地壳各向异性特征初步研究     

吴鹏  李相平  高原  石玉涛  刘立申 《地震》2017,37(1):73-81

邢台地区处于华北平原地震带中南段, 是华北地区活跃的地震活动区。 本研究根据该地区的构造环境, 采用SAM方法研究地壳各向异性特征, 通过对邢台地区台站的数字波形进行分析, 初步得到邢台地区的剪切波分裂参数, 该地区的快剪切波平均偏振方向为73.9°±40.2°, 慢剪切波平均时间延迟为(2.74±1.54) ms/km。 结果表明, 快剪切波平均偏振方向与华北区域最大主压应力场方向基本一致, 但是受到局部断裂的制约, 部分台站下方的快剪切波的偏振方向显示为NWW方向。  相似文献   

滇西南普洱强震群地区地壳形变的数值模拟     

李铁明  白玉柱  邵德晟 《中国地震》2017,33(2):203-218

滇西南普洱一带地质构造复杂,中-强地震成群活动特征明显,地壳的形变特征与形变机制引起了地学界的广泛关注和深入研究。在参考、借鉴以往研究成果的基础上,本文构建了普洱一带包含活动断裂的二维板有限元模型,以GPS测量得到的块体年运动量作为模型区域的边界约束,模拟计算获得了普洱地区的构造形变空间分布,以NEE、NNW 2个方向、从数值模拟角度对普洱地区的水平形变特征和区域地壳垂直形变场进行了分析和探讨。结果表明:在青藏高原东南缘扩展、高原物质重力滑塌型南东向移动的动力学背景下,研究区内NEE向断裂的活动带动牵引NNW向断裂共轭运动,隆升性质的垂直形变场与60年的大区域水准测量结果相吻合,沿NNW向形变场的分布无规律,应是区域应力累积和震后调整双重作用的结果。沿NEE向形变场呈现了较明显的西部大于东部的分布图像,特别是西北部高值区对应了2014年景谷6.6级强震,最后对研究区的区域动力学问题进行了初步探讨。  相似文献   

Watershed delineation using hydrographic features and a DEM in plain river network region          下载免费PDF全文

Zhengqing Lai  Shuo Li  Guonian Lv  Zhirong Pan  Guosong Fei 《水文研究》2016,30(2):276-288

Watershed delineation is a required step when conducting any spatially distributed hydrological modelling. Automated approaches are often proposed to delineate a watershed based on a river network extracted from the digital elevation model (DEM) using the deterministic eight‐neighbour (D8) method. However, a realistic river network cannot be derived from conventional DEM processing methods for a large flat area with a complex network of rivers, lakes, reservoirs, and polders, referred to as a plain river network region (PRNR). In this study, a new approach, which uses both hydrographic features and DEM, has been developed to address the problems of watershed delineation in PRNR. It extracts the river nodes and determines the flow directions of the river network based on a vector‐based hydrographic feature data model. The river network, lakes, reservoirs, and polders are then used to modify the flow directions of grid cells determined by D8 approach. The watershed is eventually delineated into four types of catchments including lakes, reservoirs, polders, and overland catchments based on the flow direction matrix and the location of river nodes. Multiple flow directions of grid cells are represented using a multi‐direction encoding method, and multiple outflows of catchments are also reflected in the topology of catchments. The proposed approach is applied to the western Taihu watershed in China. Comparisons between the results obtained from the D8 approach, the ‘stream burning’ approach, and those from the proposed approach clearly demonstrate an improvement of the new approach over the conventional approaches. This approach will benefit the development of distributed hydrological models in PRNR for the consideration of different types and multiple inlets and outlets of catchments. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Using monazite and zircon petrochronology to constrain the P–T–t evolution of the middle crust in the Bhutan Himalaya          下载免费PDF全文

D. Regis  C. J. Warren  C. M. Mottram  N. M. W. Roberts 《Journal of Metamorphic Geology》2016,34(6):617-639

The growth and dissolution behaviour of accessory phases (and especially those of geochronological interest) in metamorphosed pelites depends on, among others, the bulk composition, the prograde metamorphic evolution and the cooling path. Monazite and zircon are arguably the most commonly used geochronometers for dating felsic metamorphic rocks, yet crystal growth mechanisms as a function of rock composition, pressure and temperature are still incompletely understood. Ages of different growth zones in zircon and monazite in a garnet‐bearing anatectic metapelite from the Greater Himalayan Sequence in NW Bhutan were investigated via a combination of thermodynamic modelling, microtextural data and interpretation of trace‐element chemical ‘fingerprint’ indicators in order to link them to the metamorphic stage at which they crystallized. Differences in the trace‐element composition (HREE, Y, Eu_N/Eu*_N) of different phases were used to track the growth/dissolution of major (e.g. plagioclase, garnet) and accessory phases (e.g. monazite, zircon, xenotime, allanite). Taken together, these data constrain multiple pressure–temperature–time (P–T–t) points from low temperature (<550 °C) to upper amphibolite facies (partial melting, >700 °C) conditions. The results suggest that the metapelite experienced a cryptic early metamorphic stage at c. 38 Ma at <550 °C, ≥0.85 GPa during which plagioclase was probably absent. This was followed by a prolonged high‐T, medium‐pressure (~600 °C, 0.55 GPa) evolution at 35–29 Ma during which the garnet grew, and subsequent partial melting at >690 °C and >18 Ma. Our data confirm that both geochronometers can crystallize independently at different times along the same P–T path and that neither monazite nor zircon necessarily provides timing constraints on ‘peak’ metamorphism. Therefore, collecting monazite and zircon ages as well as major and trace‐element data from major and accessory phases in the same sample is essential for reconstructing the most coherent metamorphic P–T–t evolution and thus for robustly constraining the rates and timescales of metamorphic cycles.  相似文献   

A late Quaternary vertebrate deposit in Kudjal Yolgah Cave,south‐western Australia: refining regional late Pleistocene extinctions          下载免费PDF全文

Nathan R. Jankowski  Grant A. Gully  Zenobia Jacobs  Richard G. Roberts  Gavin J. Prideaux 《第四纪科学杂志》2016,31(5):538-550

  相似文献   

The Aptian–Cenomanian flora of the Razdolnaya coal Basin (Primorye region,Russia)          下载免费PDF全文

Elena Volynets  Eugenia Bugdaeva 《Island Arc》2017,26(1)

  相似文献   

新疆北山地区罗东镁铁质-超镁铁质层状岩体岩石成因   总被引：4，自引：0，他引：4  

凌锦兰  夏明哲  郭娜欣  汪帮耀  夏昭德  姜常义 《地球化学》2011,(6):499-515

罗东镁铁质-超镁铁质岩体位于塔里木板块东北部的新疆北山地区,岩体平面形态为眼球状,出露面积约2.1 km2.由纯橄岩、单辉橄榄岩、斜长二辉橄榄岩、橄榄二辉岩、方辉辉石岩、橄长岩、橄榄辉长岩、辉长岩、苏长辉长岩和淡色辉长岩组成,堆晶结构和堆晶韵律发育,属于层状岩体.岩浆演化过程中主要分离结晶/堆晶相是橄榄石和单斜辉石,此...  相似文献